unisonic technologies co., ltd ut9564 preliminary power mosfet www.unisonic.com.tw 1 of 4 copyright ? 2011 unisonic technologies co., ltd qw-r502-390.c p-channel enhancement mode power mosfet ? description the utc ut9564 is a p-ch enhancement mode power mosfet and it uses utc perfect technology to provide customers with fast switching, ruggedized device design, low on-resistance and cost-effectiveness. the utc ut9564 is ideal for applications such as low voltage applications, dc/dc converters and all commercial-industrial surface mount applications. ? features * simple drive requirement * fast switching speed * low on-resistance ? symbol to-252 sop-8 1 ? ordering information ordering number pin assignment lead free halogen free package 123456 7 8 packing ut9564l-tn3-r ut9564g-tn3-r to-252 g d s - - - - - tape reel UT9564L-S08-R ut9564g-s08-r sop-8 s s s g d d d d tape reel ut9564l-s08-t ut9564g-s08-t sop-8 s s s g d d d d tube
ut9564 preliminary power mosfet unisonic technologies co., ltd 2 of 4 www.unisonic.com.tw qw-r502-390.c ? pin configuration
ut9564 preliminary power mosfet unisonic technologies co., ltd 3 of 4 www.unisonic.com.tw qw-r502-390.c ? absolute maximum ratings parameter symbol ratings unit drain-source voltage v ds -40 v gate-source voltage v gs 25 v t a =25c -7.3 a continuous drain current (note 2) t a =70c i d -5.9 a pulsed drain current (note 1) i dm -30 a to-252 2 power dissipation (t a =25c) sop-8 p d 2.5 w linear derating factor 0.02 w/c junction temperature t j -55 ~150 c storage temperature t stg -55 ~150 c note: absolute maximum ratings are those values be yond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. ? thermal data parameter symbol ratings unit to-252 62.5 junction to ambient (note 2) sop-8 ja 50 c/w 1. pulse width limited by ma x. junction temperature. note: 2 surface mounted on 1 in 2 copper pad of fr4 board, t 10sec; 125c /w when mounted on min. copper pad. ? electrical characteristics (t j =25c, unless otherwise specified) parameter symbol test conditions min typ max unit off characteristics drain-source breakdown voltage bv dss i d =-250a, v gs =0v -40 v breakdown voltage temperature coefficient bv dss /t j reference to 25c, i d =-1ma -0.03 v/c v ds =-40v, v gs =0v, t j =25c -1 drain-source leakage current i dss v ds =-32v, v gs =0v, t j =70c -25 a gate- source leakage current i gss v gs =25v 100 na on characteristics gate threshold voltage v gs(th) v ds =v gs , i d =-250a -1 -3 v v gs =-10v, i d =-7a 28 static drain-source on-state resistance (note) r ds(on) v gs =-4.5v, i d =-5a 40 m ? forward transconductance g fs v ds =-10v, i d =-7a 13 s dynamic parameters input capacitance c iss 2240 3600 pf output capacitance c oss 300 pf reverse transfer capacitance c rss v gs =0v, v ds =-25v, f=1.0mhz 250 pf switching parameters total gate charge (note) q g 27 43 nc gate to source charge q gs 6 nc gate to drain charge q gd v gs =-4.5v, v ds =-32v, i d =-7a 14 nc turn-on delay time (note) t d(on) 14 ns rise time t r 8 ns turn-off delay time t d(off) 46 ns fall-time t f v gs =-10v, v ds =-20v, i d =-1a, r g =3.3 ? , r d =20 ? 17 ns source- drain diode ratings and characteristics drain-source diode forward voltage (note) v sd i s =-2a, v gs =0v -1.2 v reverse recovery time (note) t rr 37 ns reverse recovery charge q rr i s =-7a, v gs =0v, di/dt=100a/s 57 nc note: pulse width 300s, duty cycle 2%.
ut9564 preliminary power mosfet unisonic technologies co., ltd 4 of 4 www.unisonic.com.tw qw-r502-390.c utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior writ ten consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
